你好。
Hello.

之前的讲座，我们学习了数字输入和数字显示的用法以及我们所做的，我们将 100 写入数字输入，我们在数字显示区域看到它。
Previous lectures, we learned numerical input and numerical display usage and what we did, we were writing to 100 to numerical input and we were seeing it on numerical display area.

但想象一下您想要将我们的数字输入作为数据写入，例如 5。
But imagine you want to write to our numerical input as data, for example, five.

但您希望在您的策略程序中看到它是 50，或者您希望将 50 写入 HDMI，但您希望将其用作您的程序中的 5。
But you want to see it into your policy program is 50 or you want to write 50 to HDMI, but you want to use it as five into your programming.

我们应该怎么做？
How can we do this?

首先，进入右侧，我们需要进入数字输入区域。
First of all, into the right side, we need to go to numerical input area.

现在我不打算在这里谈论它。
And now I'm not going to talk about it here.

我将进入扩展的无操作和脚本区域。
I will go to just the extended no operation and script area.

OK，然后操作选项卡，你会看到数据操作，需要选择数据操作。
OK, and then Operation tab, you will see the data operation need to select data operation.

这是第一件事。
This is the first thing.

然后选择数据操作后，您将看到监视器和右侧区域。
And then after the data operation is selected, you will see the monitor and the right area.

我们需要选择监控数据表达式和正确的数据表达式。
We need to select the monitor data expression and the right data expression.

在这里，如果我点击过期，您将看到 A 和 B 样式。
And here, if I click to expiration, you will see A and B style.

我们可以使用a b、c d选项，比如这里我会选择A和B就OK了，你会选择常数a加b，你就会看到它。
We can use a b, c d options, for example, into here I will select A and B OK and the constant a plus b you will select, you will see it.

例如，a 除以 B B 将是。
For example, a divided by B B is going to be, for example.

10.

10.

好的。
OK.

这就是监控，而且在这一点上，例如，对于我们可以说的正确的事情，我们可以使用乘法和 10。
And this is the monitoring and also at this point, for example, to the right thing we can say, we can use multiplying and 10.

好的。
OK.

我会说，好吧，这将是零设备。
And I will say, OK, this is going to be as device the zero.

就在这里，零。
That's right here, the zero.

我会说“OK”并显示数字。
And I will say OK and numerical display.

我会把它放在这里。
I will put it to here.

这是第一件事，我会在这里再写一次。
This is the first thing and I will write here again.

零，好吧。
The zero, OK.

而且非常好。
And very good.

编程领域会发生什么？
What will happen into the programming area?

我会说 L D 是 m 千，我会说将零 d 移至。
I will just say L D is m a thousand and I will say just move the zero d to.

这只是一个基本程序。
This is just a basic program.

我将转换它并启动模拟器。
I will convert it and I will start the simulator.

然后我们就会看到它。
Then we will see it.

好的，在这里我们已经启动了模拟选项，它现在正在运行并且正在写入策略。
OK, here we have started the simulation option and it is now running and it is writing to the policy.

好的，让我们关闭它，然后转到屏幕并启动屏幕模拟器。
And OK, let's close it and let's go to the screen and let's start a screen simulator.

它正在开始。
It is starting.

只要再重申一点，我们就会看到。
Just reiterate that little bit more, and we will see.

乔蒂，2082 年，开始，我会给你写 5。
And Jyoti, 2082, starting, and I will write you just a five.

好的，我会说，输入。
OK, and I will say, enter.

好的。
OK.

当我在保单程序中写入5时，你会看到它是50，好吗？
When I write five into the policy program, you will see it is 50, OK?

为什么？
Why?

它是 50，因为我们将这个数据乘以 10 进入运算部分。
It is 50 because we are multiplying this data by 10 into operation section.

监控和写作。
The monitoring and writing.

现在我们正在写作。
Now we are writing.

正因为如此，我们正在成倍增加。
Because of that, we are multiplying.

现在发生了什么？
And now what happened?

它被写入其中。
It is written into it.

政策乘以 10 再乘以 5。
Policy multiplied by 10 and five.

乘以 10。
Multiplied by 10.

是 50。
It is 50.

如果我要监控的话，好吧，那就这个数字显示。
If I want to monitor it, OK, then this is the numerical display.

如果我走到这里，如果我走到数据操作和数据过期，好的，此时我们可以说，我们可以再次选择增益和B，此时我们可以在这里说两个，例如，不是我会说只有二除以二。
And if I go here, if I go to data operation and data expiration, OK, at this point and what we can say, we can select again gain and B, and at this point we can say two here, for example, not the I will say just two and divided by two.

我会说好的，我会说好的，让我们稍后更新。
And I will say OK and I will say OK and let us some later updated.

即将更新并读取项目数据，我们需要稍等一下。
It's going to be updated and reading a project data, we need to wait a little bit more.

现在我们正在读五和二十五，并且分两读，然后是五和二十五，好的。
And five and 25 now we are reading it and reading by divided two, then five and twenty five, OK.

根据英国税务海关总署的说法，我们不能将我们的计时器、价值观或任何其他价值观纳入政策项目。
And we can't adopt our timer, values or any other values into policy project, according to HMRC.

我们可以采用我们的 HMO，根据政策数据和数据表达式，我们可以除以它，我们可以乘以它，或者我们可以编辑我们的收益的偏移量，你可以这样想。
And we can adopt our HMO, according to policy data with the data expression, and we can divide it, we can multiply it or we can edit as offset that our gain that you can think it like that.

好的，本教程到这里就结束了。
OK, for this tutorial, I'm finished here.

在下一个教程中再见？
See you in the next tutorial?